historical lighting fixtures

historical lighting fixtures

Building a house takes a lot of planning and a lot of though put into the little details. Where you put your electric outlets and switches may not seem that important, but when you start placing furniture and plugging in lamps and other electronics, it will. Taking the time to plan the wiring of a house always pays off in the long run.

If you aren’t sure where everything is going to go in the house the best thing to do is place an outlet on every wall. Wiring you house this way will allow for a lot of flexibility on where you place your furniture. Also placing all the outlets a foot off the floor will make them easy to access. Switches are best placed where you enter a room so that you can turn on a light as you come in and you won’t be stumbling around in the dark.

You need to determine where fixed lighting will go next. Canned lighting is appropriate for areas such as the kitchen and family room. It is best to put canned lighting on a dimmer switch since they can sometimes seem too bright. Ceiling fans with a light fixture are another option to consider. There is a wide variety to choose from and a fan is nice for a light breeze on a warm night.

Once you have made all the decisions on outlets, switches and fixtures it is best to draw out a plan for each room to be wired. Then you can easily make a list of materials that you will need.

This is also the time to decide if you would like any three-way switches installed. They can be useful for rooms that have two entrances, so that you can turn on and off the lights from either side.

The only real difference in a regular switch and a three-way switch is that the two switches on the opposite sides of the room are hooked together with what is called a traveler wire. You will have one end of the traveler wire pulled through both boxes at each entrance of the room. Then it is just a matter of twisting the wires from the traveler with the regular wires, by matching up the colors and then wiring the switch normally. When you look at the switch the only difference is that it will have double wiring on one side.

Once your planning is done and all your materials bought you can get started wiring your house.

Please remember though to make sure the power is off before you start.

Ferrowatt 1910N - 1910 Antique Replica Light Bulb, 60 Watt, 120 Volt $9.99 1910 Antique Replica Light Bulb, 60 Watt, 120 Volt...

30 Watt Squirel Cage Vintage Edison Reproduction Light Bulb $8.95 Splendid replicas of Thomas Edison era, Victorian style carbon filament light bulbs. Not only do these bulbs emit a soft, eye pleasing glow bu also provide a superior solution to the problems of accurately restoring fine early electric and gas style lighting fixtures. It is a common and sometimes frustrating experience for the dealer or restorer to place modern tungsten filament light bulbs in a n...

2 Light Wall Sconce. A Historical Brass Collection . (2302-PB) 2 Light Wall Sconce. A Historical Brass Collection by Crystorama Lighting....

For Historic Buildings, Lighting (Historic Interiors Series) $18.60 How to Light a historic interior appropriately--or create a realistic period look--can be a perplexing problem. Few people want to return to the days when light came mainly from candles, kerosene, gas or available sunlight. But acceptable ways of re-creating old lighting do exist, and Lighting for Historic Buildings shows how to find them. This invaluable guide provides both a history of lighting ...

Most DIY home centers have what is called “wire moulding” that is availible in white or beige that allows you to run wiring exposed in a neat little chase way.

This site will explain it better http://www.genovaproducts.com/wiremanagement.htm

Ferrowatt 1910N - 1910 Antique Replica Light Bulb, 60 Watt, 120 Volt $9.99 1910 Antique Replica Light Bulb, 60 Watt, 120 Volt...

30 Watt Squirel Cage Vintage Edison Reproduction Light Bulb $8.95 Splendid replicas of Thomas Edison era, Victorian style carbon filament light bulbs. Not only do these bulbs emit a soft, eye pleasing glow bu also provide a superior solution to the problems of accurately restoring fine early electric and gas style lighting fixtures. It is a common and sometimes frustrating experience for the dealer or restorer to place modern tungsten filament light bulbs in a n...

2 Light Wall Sconce. A Historical Brass Collection . (2302-PB) 2 Light Wall Sconce. A Historical Brass Collection by Crystorama Lighting....

For Historic Buildings, Lighting (Historic Interiors Series) $18.60 How to Light a historic interior appropriately--or create a realistic period look--can be a perplexing problem. Few people want to return to the days when light came mainly from candles, kerosene, gas or available sunlight. But acceptable ways of re-creating old lighting do exist, and Lighting for Historic Buildings shows how to find them. This invaluable guide provides both a history of lighting ...

Suspension Hardware for AquaticLife T5 & Power Compact Light Fixtures $27.89 Suspension Hardware for AquaticLife T5 and Power Compact Aquarium Lighting Fixtures. AquaticLife Suspension Hardware Installation instructions may be found here

Historical Edison Bulb Set for Candelaria Chandelier by Robert Abbey $205.7 The Robert Abbey Historical Edison Bulb Set for the Candelaria Chandelier features tugnsten-filament vintage reproduction bulbs that creates a dramatic visual affect when paired with modern lighting fixtures. The Historical Edison Bulb Set contians 40 Watt, 120 Volt Type A Incandescent bulbs that is available in a set of 12, 18 or 30. Robert Abbey has been designing and manufacturing fine lighting since 1946. They offer a diverse collection--wall swingers, chandeliers, floor lamps and more--in a myriad of styles, from tradition to neoclassical to groovy. Collaborating with acclaimed designers Jonathan Adler, Rico Espinet and David Easton, Robert Abbey creates impeccable lighting that is perfect for modern everyday living. The Robert Abbey Historical Edison Bulb Set for Candelaria Chandelier is available with the following: Details:UL ListedOptions:Number of Lights: 12 Lights, 18 Lights, or 30 Lights.Lighting: 40 Watt 120 Volt Incandescent lamps. Please Note: Wattage is not indicative of light output, expect about 50% less light than a standard bulb of the same wattage. Shipping: This item usually ships in 2-3 weeks. Dimensions: Bulb: Height 4.75 In., Width 2.25 In.

Surface Canopy by Wilmette Lighting $96 The Wilmette Lighting Surface Canopy tailors your ceiling uniquely with its classic detailing while granting a pleasing character to your Wilmette pandant or adjustable spotlight. The Surface Canopy features a metal body. Wilmette Lighting, headquartered in Wilmette, Illinois, designs and manufactures superb historical lighting fixtures for indoor and outdoor applications. The Wilmette Lighting Surface Canopy is available with the following: Included Features:Metal body.One 75 Watt 12 Volt electronic transformer.ETL Listed.UL Listed.Options:Finish: Antique Bronze, Polished Nickel (shown), or Satin Nickel.Shipping: This item usually ships within three- to five business days. Dimensions: Ceiling Canopy: Height 2.3 In., Diameter 4.6 In.

LED Monorail by Wilmette Lighting $420.8 The Wilmette Lighting LED Monorail Kit is the easiest way to order a superb LED monorail lighting system. Each MonoRail lighting kit comes with all the power and hardware you need for most basic installations of a quality, low-voltage lighting system. Wilmette Lighting, headquartered in Wilmette, Illinois, designs and manufactures superb historical lighting fixtures for indoor and outdoor applications. The Wilmette Lighting LED Monorail is available with the following: Kit Included Features: (1) 8 Foot hand-bendable MonoRail (2) sets of decorative end caps (2) rigid standoff supports LED 60 Watt flat surface monorail transformer. ETL Listed.Options:Finish: Antique Bronze, or Satin Nickel.Shipping: This item usually ships within three- to five business days.

Mission Glass Shield Accessory by Wilmette Lighting $48 The Wilmette Lighting Mission Glass Shield Accessory concocts positive energy, offering it an impressive view for your Wilmette lighting fixtures. The Mission Glass Shield Accessory features a pressed glass material. Wilmette Lighting, headquartered in Wilmette, Illinois, designs and manufactures superb historical lighting fixtures for indoor and outdoor applications. The Wilmette Lighting Mission Glass Shield Accessory is available with the following: Included Features:Made of pressed glass.Snap louver lens holder.ETL Listed.UL Listed.Options:Color: Amber, or Frost (shown).Shipping: This item usually ships within three- to five business days. Dimensions: Item: Height 2 In., Diameter 3 In.

Drake Wall Sconce by Wilmette Lighting $364 The Wilmette Drake Wall Sconce creates bright illumination in a classic swingarm design that creates flexible lighting options. The Drake Sconce, part of the Wilmette Lighting collection, is a superb example of historical-style lighting design paired with cutting-edge technology. Wilmette Lighting, headquartered in Wilmette, Illinois, designs and manufactures superb historical lighting fixtures for indoor and outdoor applications. The Wilmette Drake Wall Sconce is available with the following: Included Features: One Murano glass diffuser. Adjustable swingarm.Integral on/off switch.UL Listed. Options: Finish: Polished Nickel (shown) or Satin Nickel.Glass Color: Latte (shown) or White. Lighting: One 75 Watt 120 Volt Medium Base A19 lamp (included) that is dimmable with a standard incandescent dimmer. Shipping: This item usually ships within three- to five business days. Dimensions: Height: 11.8 in. Width: 6.9 in. Reach: 6.9 in. to 14.5 in.

Congress Pendant by Wilmette Lighting $256 The Wilmette Lighting Congress Pendant ushers in comfort by providing even illumination throughout a room. The Congress Pendant, a circa 1930 lighting design, features historical Halophane, a prismatic glass that reduces glare and enchances visual comfort. Wilmette Lighting, headquartered in Wilmette, Illinois, designs and manufactures superb historical lighting fixtures for indoor and outdoor applications. The Wilmette Lighting Congress Pendant is available with the following: Included Features: One rounded-shaped, holophane prismatic glass shade.Metal body.72 in. field-cuttable suspension cable.ETL Listed.UL Listed.Options: Color: Clear (shown).Finish: Antique Bronze, Polished Nickel (shown), or Satin Nickel.Mounting: Freejack, Monopoint, or Monorail.Mounting Details: Monorail: Includes One 50 Watt Bulb and Freejack adaptor for monorail installation.Monopoint: Includes One 50 Watt Bulb, 4 inch round flush canopy and Low-Voltage Transformer.Freejack: Includes One 50 Watt Bulb. See Related Items for mounting options.Lighting: One 50 Watt 12 Volt Bi-Pin Low-voltage Halogen lamp (included). Shipping: This item usually ships within three- to five business days. Dimensions: Cable: Length 72 In. Fixture: Height 6.5 In., Diameter 6.5 In. Hanging Length: Overall Length Adjustable to 78.5 In.

Randolph Pendant by Wilmette Lighting (for Monorail) $180 The Wilmette Randolph Pendant for Monorail casts a buttery, sunrise glow that adds comforting ambience to interiors. The Randolph Pendant for Monorail, part of the Wilmette Lighting collection, is a superb example of historical lighting design paired with cutting-edge technology. Wilmette Lighting, headquartered in Wilmette, Illinois, designs and manufactures superb historical lighting fixtures for indoor and outdoor applications. The Wilmette Randolph Pendant for Monorail is available with the following: Included Features: One Onyx diffuser. Decorative metal cap. One monorail Freejack connector. 72 in. field-cuttable suspension cable.UL Listed.Options: Finish: Antique Bronze, Polished Nickel (shown), or Satin Nickel.Lighting: One 50 Watt 12 Volt Bi-pin Halogen lamp (included). Sold Separately: Wilmette Monorail Kits.Shipping: This item usually ships within three- to five business days. Dimensions: Height: 6.8 in. Overall Diameter: 3.9 in. Suspension Cable Length: 72 in.

Linden Pendant by Wilmette Lighting $300 The Wilmette Linden Pendant creates bright downlighting in a design that pairs classically crisp color with Victorian details. The Linden Pendant, part of the Wilmette Lighting collection, is a superb example of historical-style lighting design paired with cutting-edge technology. Wilmette Lighting, headquartered in Wilmette, Illinois, designs and manufactures superb historical lighting fixtures for indoor and outdoor applications. The Wilmette Linden Pendant is available with the following: Included Features:Ornate casting cap.72 in. field-cuttable Clear Stream cable.UL Listed.Options:Glass Color: Frost or White Frit (shown).Finish: Antique Bronze, Polished Nickel, or Satin Nickel (shown).Lamping: Compact Fluorescent or Incandescent.Lighting: Compact Fluorescent version utilizes one 18 Watt 120 Volt 2G11 Base Twin Tube Long lamp with Electronic Ballast (included). Incandescent version utilizes one 40 Watt 120 Volt T10 Medium Base lamp (included) and is dimmable with a standard incandescent dimmer. Shipping: This item usually ships within three- to five business days. Dimensions: Glass and Cap Fixture Height: 13.6 in. Glass Diameter: 2.5 in. Suspension Cable Length: 72 in.

Victorian Pendant by Wilmette Lighting $372 The Wilmette Victorian Pendant inspires with its lovely design and inviting illumination. The Victorian Pendant, a part of the Wilmette Lighting collection, is a superb example of historical-style lighting design paired with cutting-edge technology. Wilmette Lighting, headquartered in Wilmette, Illinois, designs and manufactures superb historical lighting fixtures for indoor and outdoor applications. The Wilmette Victorian Pendant is available with the following: Included Features:One Frost fluted glass diffuser. One cast Brass decorative cap.One ceiling canopy.72 in. field-cuttable Clear Stream cable.UL Listed.Options:Finish: Antique Bronze, or Satin Nickel (shown).Lamping: Compact Fluorescent, or Incandescent.Lighting: Compact Fluorescent version utilizes one 13 Watt 120 Volt GX24Q-1 Base Triple Tube lamp with Electronic Ballast (included). Incandescent version utilizes one 40 Watt 120 Volt Mini Candelabra Base lamp (included) and is dimmable with a standard incandescent dimmer. Shipping: This item usually ships within three- to five business days. Dimensions: Fixture: Height 14 In., Diameter 8.3 In. Suspension: Overall Length Adjustable to 86 In.