touch lamps circuitry how do you make

touch lamps circuitry how do you make

Electrical things not working? You can test hundreds of electrical things in your home from appliances to batteries. It’s really quite easy.

Electrical devices convert electricity into another form of energy. Included are large and small appliances, computers, telephones, lighting, and lots more. Electrical things convert electrical energy into movement, heat, cold, light, sound, images, and many other useful services.

All you need to test electrical household things is a low-cost continuity tester or a multimeter available at hardware stores. You can buy a continuity tester for less than $5.00. A multimeter (under $20) measures the amount of power (voltage) being applied, electricity (current) being used, and how much resistance it needs to overcome to do the job. Power is measured in volts (V), current is counted in amperes or amps (A), and resistance is calculated in ohms (O).

There’s one more electrical term you’ve probably heard. Defining it will come in handy as you fix electrical devices. A watt is the amount of power consumed by an electrical device when it is running. A 750-watt toaster, for example, uses 750W (watts) of power when toasting your wheat, rye, sourdough, or other bread in the morning.

Continuity Tester

Electricity needs a continuous path or circuit in order to flow. It’s like a two-lane road from point A to point B and back. If one or both lanes are blocked, traffic–in this case, electricity–stops. A continuity tester is useful for checking cords and wires to make sure they can conduct electricity.

To use a continuity tester, follow these steps:

1. Disconnect the cord from the power source (electrical receptacle).

2. Make sure any switches on the device are on.

3. Place the continuity tester’s clip on one prong of the cord.

4. Touch the tip of the continuity tester to the other prong. If there is continuity, the tester will light up. If not, it won’t.

Here’s what happens: The continuity tester sends electricity from an internal battery through one cord prong and down the wires. If the light gets electrical current from the other prong it lights up, meaning that the path is good. Otherwise, something is stopping it. Remove the cord from the appliance and test each of the two wires separately to see which one doesn’t work. If both work, the short is in the appliance itself.

Multimeter

A multimeter (also called a volt-ohmmeter or VOM) is another way of testing continuity. Use it to measure the amount of alternating current (AC or household current) or direct current (DC or battery current) in a plugged-in or live circuit. It can check voltage, too. For example, a multimeter can verify that there are about 120 volts in an AC circuit or that a 9-volt battery is fully charged. In addition, a multimeter can check resistance. A continuity tester checks resistance, but answers yes or no. A multimeter checks resistance and reports how many ohms (the measurement of resistance) a circuit carries.

You can use a multimeter to test motors, switches, controllers, and many other electrical gadgets. Refer to the multimeter’s instruction sheet for specifics.

Here’s how to use a multimeter to test an electric appliance:

1. Disconnect the cord from the power source, except when testing a live circuit.

2. Plug the test leads in to the multimeter.

3. Select the function (ACV, DVC, resistance) and the range (maximum reading expected).

4. Connect the probes to the cord or appliance component.

5. Interpret the reading. Refer to the product manual for tips on what may be wrong and what you can do about it. In addition, there are numerous resources online.

Don’t let a simple electrical problem keep you from using the power of electricity. A couple of simple electrical tests can help you in fixing household things that break — instead of tossing them.

Rubik's Cube You Can Do It! Game and DVD $12.99 Learn from the experts! Everything you need to play...and win! Makes a great gift! This easy-to-follow DVD carefully shows you how to twist and turn the Cube and methodically solve it. Includes a Rubik's Cube too! Includes original Rubik's cube and instructional DVD. Cube measures about 2-inches on each side. Ages: 8 and up Players: 1

Finishing Touch Flushmount by Forecast $54 The Forecast Finishing Touch Flushmount offers a straight forward design that provides ample task lighting. The Finishing Touch Flushmount features a White Alabaster glass shade and steel body with Satin Nickel finish. Dedicated to seeking customer feedback, Forecast Lighting has generated distinctive lighting designs that clearly stand out in a crowded marketplace. Founded in Southern California in the early 1970s as Forecast Lightolier, this unique lighting company has an in-house design team that travels the world to identify materials and trends that will ultimately result in extraordinary lighting for the home and office. The Forecast Finishing Touch Flushmount is available with the following: Details:White Alabaster glass shadeSteel fittingsSatin Nickel finishMounting hardwareUL Listed for damp locationsOptions:Size: Large, Medium (shown), or Small.Lighting:Large option utilizes three 60 Watt 120 Volt Medium Base Incandescent lamps (not included).Medium option utilizes two 60 Watt 120 Volt Medium Base Incandescent lamps (not included).Small option utilizes one 60 Watt 120 Volt Medium Base Incandescent lamps (not included).Shipping: Shipping information will be emailed to you within two business days after placing an order. Dimensions: Large Fixture: Height 6.5 In., Width 15 In. Medium Fixture: Height 6.5 In., Width 13 In. Small Fixture: Height 6.5 In., Width 11 In.

Lumen Max 3 Reflector for 150W HQI Lamps $159.99 Your tank is a reflection of you, so give it the best reflection of light possible. The Lumen Max 3 reflector is a double ended HQI reflector designed with a combination of smooth and textured German aluminum and a durable black powder coated finish. The lightweight housing has a detachable 15 ft. cord and eye bolts to make installation safe and easy. Light up your tank and let your aquarium shine with bright metal halides.

Lumen Max 3 Reflector for 250W HQI Lamps $164.99 Your tank is a reflection of you, so give it the best reflection of light possible. The Lumen Max 3 reflector is a double-ended HQI reflector designed with a combination of smooth and textured German aluminum and a durable black powder coated finish. The lightweight housing has a detachable 15 ft. cord and eye bolts to make installation safe and easy. Light up your tank and let your aquarium shine with bright metal halides.

24 in. Nova Extreme T5 HO Light Fixture - (4) 24 watt lamps $209.99 Powerful, yet space-saving High Output T5 lamps make the Nova Extreme fixture the ultimate lighting source for reef aquariums. Featuring all the light your corals and other reef organisms need to thrive: 460 nm actinic blue lamps and 10,000K ultra daylight lamps. Each lighting source runs on independent circuits so you can customize your day/night cycles. Top off the perfect lighting with a low-energy consuming electronic ballast,reflector that increases lighting output, and you've got yourself one powerful, yet sensible lighting fixture that provides your reef with the best light available...second only to the sun itself.

Touch Me Wall Sconce by Omikron Design $1182.82 To control its light, do what the sconce says. The Omikron Design Touch Me Wall Sconce has a petite metal sphere at its center that, with a touch, acts as the on/off switch. This sphere is set in the middle of a recessed panel of Red-painted aluminum which, through a circular opening, provides a vibrant background for the square front panel of satinized stainless steel. Since 1946, Omikron Design in Milan has devoted itself to illuminating and enhancing interiors with clean, contemporary lighting fixtures. As such, their line of ceiling lights, wall sconces, floor lamps and table lamps display timeless design and supreme functionality. Omikron Design products are distributed by Illuminating Experiences. The Omikron Design Touch Me Wall Sconce is available with the following: Details:Front square panel of satinized stainless steelBack panel of Red painted aluminumOn/off touch switchDesigned by Carlo ForcoliniLighting: Two 100 Watt 120 Volt Type R7s Halogen lamps (included). Shipping: This item usually ship within 3 to 5 business days. Dimensions: Fixture: Height 19.3 In., Width 19.3 In., Depth 3.9 In.

36 in. Nova Extreme T5 HO Light Fixture - (4) 39 watt lamps $238.99 Powerful, yet space-saving High Output T5 lamps make the Nova Extreme fixture the ultimate lighting source for reef aquariums. Featuring all the light your corals and other reef organisms need to thrive: 460 nm actinic blue lamps and 10,000K ultra daylight lamps. Each lighting source runs on independent circuits so you can customize your day/night cycles. Top off the perfect lighting with a low-energy consuming electronic ballast, a reflector that increases lighting output, cooling fan for safety and efficiency, and you've got yourself one powerful, yet sensible lighting fixture that provides your reef with the best light available...second only to the sun itself.

48 in. Nova Extreme T5 HO Light Fixture - (4) 54 watt lamps $288.99 Powerful, yet space-saving High Output T5 lamps make the Nova Extreme fixture the ultimate lighting source for reef aquariums. Featuring all the light your corals and other reef organisms need to thrive: 460 nm actinic blue lamps and 10,000K ultra daylight lamps. Each lighting source runs on independent circuits so you can customize your day/night cycles. Top off the perfect lighting with a low-energy consuming electronic ballast, a reflector that increases lighting output and a cooling fan for safety and efficiency, and you've got yourself one powerful, yet sensible lighting fixture that provides your reef with the best light available...second only to the sun itself.

Lumatek Electronic Dimmable Multi-Wattage Ballast - 150W, 175W, 250W $139.99 Lumatek Electronic Multi Watt Ballasts give you the flexibility to run multiple size metal halides with more power transfer than comparable ballasts for brighter lamps. Better power transfer also means less energy is lost, saving money for you. Rapid starting turns your lights on in less than a minute. While it is on, you can dim the lamps up to 50%. Cut off circuitry and lower heat output make it safer. Requires Sunlight Supply lamp cord, reflector, socket assembly and lamps, all sold separately. 5 year limited manufacturer warranty.

Lumatek Electronic Dimmable Multi-Wattage Ballast - 250W, 400W $169.99 Lumatek Electronic Multi Watt Ballasts give you the flexibility to run multiple size metal halides with more power transfer than comparable ballasts for brighter lamps. Better power transfer also means less energy is lost, saving money for you. Rapid starting turns your lights on in less than a minute. While it is on, you can dim the lamps up to 50%. Cut off circuitry and lower heat output make it safer. Requires Sunlight Supply lamp cord, reflector, socket assembly and lamps, all sold separately.